OpenScan Classic
The set includes:
- OpenScan Benchy
- pre-soldered and tested Pi-Shield V1 and ring light
- Arducam IMX519 with 16Mpx with 15cm and 50cm cable
- 13Ncm Nema 17 stepper motor with 1m cable
- 40Ncm Nema 17 stepper motor with 1m cable
- 2x Stepper Motor Drivers A4988
- 12V/2.5A power supply with EU Plug (!)
- small parts (M2 Nylon Screws, M3 metal screws, nuts, bolts)
You can choose whether to include the following:
- Raspberry Pi 4B 2GB with 64GB micro SD card with pre-installed firmware (plug&play)
- 3D printed parts in Azure Blue Prusament PLA
If you do not need the full bundle of parts, feel free to check out the accessory section of our shop to get the parts individually.
Important notes
The scanners come as a kit, and you will need to build it yourself. This can be done without further knowledge of programming and soldering, and only basic skills are required. You will need a small screwdriver and an Allen key for M3 bolts.
Since we cannot influence further processing and the application of the products, no liability for damages of any kind can be assumed. By purchasing and using this article, you acknowledge that you possess basic knowledge of working with electronic devices and are familiar with the necessary security precautions. Furthermore, it is assumed that you have sufficient skills and basic knowledge in dealing with both active and passive electronic components.
Contact Us