OpenScan Mini

Sale price€346,00

The set includes:

  • OpenScan Benchy
  • pre-soldered and tested Pi-Shield V1 and ring light
  • 3D printed cross-polarizer module
  • Arducam IMX519 with 16Mpx with 15cm and 50cm cable
  • 13Ncm Nema 17 stepper motor with 1m cable
  • 40Ncm Nema 17 stepper motor with 1m cable
  • 2x Stepper Motor Drivers A4988
  • 12V/2.5A power supply with EU Plug (!)
  • small parts (M2 Nylon Screws, M3 metal screws, nuts, bolts)

You can choose whether to include the following:

  • Raspberry Pi 4B 2GB with 64GB micro SD card with pre-installed firmware (plug&play)
  • 3D printed parts in Azure Blue Prusament PLA
3D printed parts: with
Raspberry Pi 4B 2GB + 64GB MicroSD with Firmware: with

Important notes

The scanners come as a kit, and you will need to build it yourself. This can be done without further knowledge of programming and soldering, and only basic skills are required. You will need a small screwdriver and an Allen key for M3 bolts.

Since we cannot influence further processing and the application of the products, no liability for damages of any kind can be assumed. By purchasing and using this article, you acknowledge that you possess basic knowledge of working with electronic devices and are familiar with the necessary security precautions. Furthermore, it is assumed that you have sufficient skills and basic knowledge in dealing with both active and passive electronic components.

Contact Us

Do you have any question?